TSOC-ESP8266 includes an 802.11 b/g/n Wi-Fi module, operating as a client and/or an Access Point, along with an GPIO Expander to provide an additional 16 Input/Output pins for the thingSoC Socket, and an RGB LED for USER status, with additonal LEDS for Battery Charger Status and USB Status. The TSOC-ESP8266 accepts any thingSoC or Mikrobus module, to provide Wi-Fi to almost anything as a bridge, including RS-232, RS-485, GSM, GPS, BLTE, motor control, analog sensors, and much more.
TSOC-ESP8266 - USB based Programmable System-on-Chip Features :
- Supported by the Arduino IDE
- Wi-Fi and Over the Air Program Upgrade/Download
- thingSoC Compliant Module
- Mikrobus Compatible Module]
- ESP8266 Wi-Fi Module 802.11 b/g/n
- +19.5dBm output power in 802.11b mode
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Internal Antenna and U.FL external Antenna Support
- RGB Color LED for status
- PCA8575 I/O Expander for 16 additional GPIO lines
- Analog Multiplexor and 3.3 Volt Analog Input Conditioning
- Integrated 3.7 Volt Li-Po Battery Input and Charger
- Integrated USB programming Interface (with NodeMCU protocol)
- High Speed (1mB) USB Upload Capability
- USB 2.1 BCD (Battery Charger Detect) Protocol Compatibility
- Arduino IDE Board Manager Support
Project Status
- 01/10/2016 : First Prototypes Completed (Rev 5.0)
